1. <menuitem id="6fzdw"></menuitem>
    <track id="6fzdw"><span id="6fzdw"></span></track>
  2. <menuitem id="6fzdw"><dfn id="6fzdw"><menu id="6fzdw"></menu></dfn></menuitem>
    1. <track id="6fzdw"><div id="6fzdw"></div></track>
    2. <bdo id="6fzdw"></bdo>
    3. 產品展示
      查看分類
      170SMF ZMF
      170SMF  ZMF


      J-170SMF/ZMF /全封閉全自動切條機

      Full automatic slitting machine (Cutting table with protect cover).

      J-170SM/ZM-S500/S600 大直徑雙伺服全自動切條機
      Double servo full automatic cutting machine with large diameter


      CJ-170SM/ZM-500/600 大直徑全自動切條機

      Large diameter fully automatic cutting machine



      CJ-170SM  雙數控全自動切條機

      CJ-170SM   Double CNC fabric roll slitting machine

      適用范圍:

      平推式全自動切條機及直紋,45度斜紋卷布機適用于布料、無紡布、帳篷、雨傘、泡棉、皮革、反光材料、塑膠、紙張、雙面膠、醋酸布、補強帶、導電布、銅箔等材料各種寬度直條,橫條及45度直斜條的卷布及裁切是服裝、箱包、鞋帽、服裝輔料、反光材料廠、帳篷廠、雨傘廠、電子廠等行業的理想選擇。

      技術參數:

      布料幅寬:1.7(另有2.05米、2.4米可選)        

      布料轉速:0-800 (/分鐘)

      切布直徑:300毫米,也可定制400毫米、500毫米

      布軸直徑:37毫米 布料電機功率:0.75千瓦                        

      刀片電機功率:1.5千瓦

      最小切條寬度:2毫米                          

      電壓:380V/220V可選

      外形尺寸:2.8x0.85x1.5

      配備特點:

      1、  主軸以及圓刀使用無級變速系統,可做高低無級調速及正反轉切換控制。

      2、  臺板左右移位和進退刀均采用進口高精密步進系統及進口PLC控制切割寬度及進退刀切割和磨刀系統,配合進口精密滾珠絲桿及滑軌移位,高壽命,不易磨損,使切割寬度的精度達到0.1毫米,最窄切割寬度為2毫米,進刀切割時平行快速推進,速度采用無極調速,可分段控制,紙管容易切斷,達到高精度快速切出高品質的產品。

      3、  操作界面采用電腦觸摸屏,所有操作,只需要一個畫面,可同時設定六種分切寬度和次數,并顯示實際切割次數,并設有手動/自動轉換及磨刀手動/自動轉換功能。

      4、  在手動功能下,設有十字搖桿手柄,操作更加人性化!更加便捷,移動速度更快,移動的同時,可以在觸摸屏上顯示移動的寬度,達到更加精準。

      5、  配備數控自動雙面磨刀系統,電腦控制砂輪,自動進退,并根據刀片大小自動定位,可設定磨刀次數及時間,自動啟動旋轉,自動停止,采用金剛石砂輪磨削,經久耐用,不易發熱,刀片磨后光潔度高,使用壽命是普通白玉剛砂輪的十倍,刀片不用拆卸,即可磨刀。刀片長期保持鋒利,達到最佳裁切質量,并附有自動吸塵裝置,保持布料及軌道清潔。

      6、  采用快速放料設計,一步到位。上料下料只須一個動作即可完成。

      7、  電路采用各個獨立控制系統,每條線都做有標號,診斷維修簡單快捷,不易出故障。

      8、  夾布卡盤配有安全防護罩,不傷人。電線配有工程塑料鏈條保護,電線不容易折斷,不容易老化。

      Application:

      Flat push automatic cutting machine and the ruled, 45-degree diagonal rolling machine for fabrics, woven fabrics, tents, umbrellas, foam, leather, reflective material, plastic, paper, double sided tape, acetate cloth, reinforced belt, conductive cloth, copper and other materials of various width straight, straight bar and 45 ° oblique cut of the cloth and roll apparel, bags, shoes, clothing accessories, reflective material factory, tent factory, umbrella factory, electronics factory and other industries the ideal choice.

       Technical parameters:

      Fabric width: 1.7 m (another 2.05 meters, 2.4 meters optional)

      Fabric speed :0-800 (rev / min)

      Cloth Diameter: 300 mm, 400 mm、500 mm can also be customized

      Fabric shaft diameter: 37 mm

      Fabric Motor power: 0.75

      Kilowatts Blade motor power: 1.5 kw

      Cutting width: 2 mm Voltage: 380V/220V

      Optional Dimensions: 2.8 m x1.5 m x0.85 m

       Feature:

      1、Circular knife spindle, and use the CVT system, do the level of variable speed and reversing switch.

      2、Platen displacement and retreat around the knife are made of imported high-precision stepper PLC control system and imported cutting width and cutting and knife sharpening system, advance and retreat, with the import of precision ball screw and slide the shift, the high life, easy to wear , so that the width of the cutting accuracy of 0.1mm, the narrowest cutting width of 2mm, cutting parallel to the fast feed advance speed with stepless speed, can be sub-control paper tube is easy to cut, to cut out high-precision high-quality fast products.

      3、The use of computer touch-screen interface, all operations, only one screen, you can also set the width and cut the number of six kinds, and show the actual cutting times, and with manual / automatic conversion and sharpening manual / automatic conversion.

      4、The manual functions, the rocker has a cross handle, operate more humane! More convenient, moving faster, moving at the same time, you can move on the touch screen display width, to be more precise.

      5、Automatic two-sided sharpening system with numerical control, computer control wheel, automatic advance and retreat, and automatic positioning according to blade size, frequency and timing of sharpening can be set to automatically start the rotation, auto-stop, using the diamond grinding wheel, durable, easy to heat, high finish after grinding blades, grinding wheels of life ten times the ordinary Baiyu Gang, without disassembling the blades, you can knife. Long-term sharp blade, to achieve the best cutting quality, along with automatic cleaning devices to keep track of cloth and clean.

      6、Using fast discharge design, in one step. Cutting only on the material to complete an action.

      7、Each individual circuit control system, each line has done a label, diagnostic maintenance quick and easy, not easy to fail.

      8、Buka folder with security cover plate, not hurt. Chain with a plastic wire protection, cable is not easily broken, is not easy to aging.

      特征

       

      CJ-170ZM全自動切捆條機相比(以下均以CJ-170ZM表示):

      1、a擁有精準電腦自動雙面磨刀系統,并可根據客戶自己的要求,設定切多少次數磨一次刀,磨刀耗時多少,磨刀裝置會自動根據程序操作。BCJ-170ZM采用的是手搖式將砂輪靠近刀片兩側,讓刀片與砂輪放置一旁磨,達到刀片鋒利,需人工退砂輪。

      2、進刀采用雙步進電機系統控制,進刀步驟分為‘慢--慢’;而以往CJ-170ZM,采用絲桿電機帶動進刀,速度總保持一樣,較為緩慢。雙步進電機系統比絲桿電機帶動速度高一倍。

      3、控制方式:a:采用高精度觸摸屏控制,任何步驟只需要一個界面,而且反應速度靈敏;CJ-170ZM采用LED按鍵式顯示屏控制,按鍵使用久了,容易導致按鈕及其電路板損壞,每個步驟有不同的操作界面。b:雙數控還采用了獨立十字開關控制進刀-退刀,臺進-臺退,機器工作中,如有情況改變,可以用及時控制。

      4、刀片防護罩:雙數控擁有將刀片一半以上保護在防護罩內,內置有風扇和流水槽來冷卻刀片。

      5、效率:CJ-170SM雙數控切捆條機切一捆布所耗的時間是CJ-170ZM所消耗的時間的一半

       

      售后服務時間:早上800——晚上1030周末不休息

      超駿機械竭誠為您提供高品質的產品及最有保障的售后服務。




      數據提供:天助網    
      商盟客服

      您好,歡迎蒞臨超駿機械,歡迎咨詢...

      謝先生: 點擊這里給我發消息
      正在加載

      觸屏版二維碼

      1. <menuitem id="6fzdw"></menuitem>
        <track id="6fzdw"><span id="6fzdw"></span></track>
      2. <menuitem id="6fzdw"><dfn id="6fzdw"><menu id="6fzdw"></menu></dfn></menuitem>
        1. <track id="6fzdw"><div id="6fzdw"></div></track>
        2. <bdo id="6fzdw"></bdo>
        3. 区一区二视频免费观看_伊人久久大香线蕉综合_另类亚洲欧美专区第一页,欧美综合自拍亚洲综合图,波多野结衣全集,亚洲中文字幕在线不卡电影